Chapters Transcript Loading a Feeding Set to the Kangaroo™ Connect Learn how to load a feeding set to the Kangaroo™ Connect. hang the prepared feeding set bag or fluid container so the starting volume of fluid is 10 inches above the top of the pump has shown press the power button centered below the pump screen to power up the pump. If you have used the pump previously, your last settings were automatically retained for you. Press. Keep settings to keep the settings from the last feeding. Otherwise, press clear settings. Next, you will see the load set screen. Follow the animated instructions on the screen, sliding the bottom pegs of the cassette up into the slots, then locking the top into place. The set loaded screen will confirm that the pump has correctly identified the feeding set. Created by