Chapters Transcript Adjusting the rate of Kangaroo OMNI™ When the pump is primed, the ready to feed screen will appear for continuous feeding. Press the adjust rate button, press the plus and minus buttons to increase or decrease the rate to be delivered. Push and hold on either the plus or minus buttons to accelerate the numbers press ok. When desired rate has been selected to return to the ready to feed screen for intermittent feeding press more options on the ready to feed screen. Intermittent mode delivers a fixed volume of nutrition to the patient. The kangaroo Omni enteral feeding pump can be configured to deliver a single feed or multiple feeds at fixed intervals, press the down arrow until intermittent mode is highlighted. Then press the select button on or off will be displayed to indicate if intermittent mode is turned on. Press done to continue. The ready to feed screen will appear. Press the adjust feed button from here. You can choose to adjust rate, adjust number feeds and adjust volume. Press the adjust rate button to adjust the feed rate. Press the plus and minus buttons to set the rate to be delivered. Press ok, to save the settings and return to the adjust feed screen, press the adjust number feeds button to adjust the number of feeds to be delivered. Press the plus and minus buttons to set the number of feeds to be delivered. Press ok, to save settings and return to the adjust feeds screen. If the selected number feeds is greater than one, an adjust interval button will appear on the adjust feed screen. This will determine how many hours between the feeds. Press the adjust interval button to adjust the interval between feeds to be delivered. Press the plus and minus buttons to set the interval between feeds and hours press. Ok. To go back to the adjust feed screen, press the adjust volume button to adjust how much feed is delivered. Press the plus and minus buttons to set the volume of feed to be delivered. Press. Ok, to go back to the adjust feed screen press done to go back to the ready to feed screen. If applicable, you can adjust flush press, adjust flush, then adjust volume, press the plus and minus buttons to input the desired flush volume press. Ok, to confirm the flush volume and return to the adjust flush screen, press the adjust interval button, press the plus and minus buttons to input the desired time interval press. Ok. To confirm the flush volume and return to the adjust flush screen press done to confirm the time interval and return to the ready to feed screen. For more information, please refer to the kangaroo omni enteral feeding pump instructions for use. Created by
